The overall objective is to develop an approach to include the influence of welding residual stresses in fatigue assessments through direct simulations.
First, welding residual stresses in small-scale specimens and in large structures will be determined and compared. Residual stresses in small specimens used for experimental investigations are often relatively low due to the lack of structural constraints. The investigations will show in what range residual stresses are present in small-scale specimens used for fatigue tests and how they will differ in larger components. Using numerical welding simulations a wide range of plate thicknesses and specimen dimensions will be assessed in order to identify the influence of geometrical parameters on residual stresses. Bringing together the simulation results for the models of different dimensions, will allow a comparison between residual stresses in small-scale specimens and large structures.
Since residual stresses may be redistributed or relaxed by superimposed external loads, for fatigue assessments the stabilized residual stresses after loading are relevant. Using numerical simulations, this redistribution is calculated for different load levels between compression and tension, i.e. different load ratios. As a result, the effective residual stresses affecting fatigue will be determined for different combinations of residual stress levels and load cases and compared for small and large-scale components.
In fatigue tests it will then be investigated how residual stresses affect fatigue behavior. Since residual stresses are generally not uniform over the plate thickness, the influence on crack initiation and propagation will be distinguished. Furthermore, two different weld geometries with different residual stress distributions and stress concentration factors will be compared: cruciform joints, transversal to the loading direction, and stiffeners longitudinal to the loading direction. Subsequently the residual stress influence will be compared to that of mean stresses. Overall, the test results will give information on the influence residual stresses have on different weld geometries compared to mean stresses.
Finally, the results of the simulations and experiments will be evaluated to develop an approach to consider residual stresses in fatigue assessments using direct numerical simulations. For this purpose it has to be determined which level of accuracy is needed in the simulations and how to read out residual stresses in order to obtain conservative outcomes.
All in all, comprehensive understanding on the effects of residual stresses will be achieved and implemented in a novel approach to include residual stresses in fatigue assessments in order to improve efficiency and safety in future design procedures.